Some extracts from SCI (Scientific Citation Index):
FN ISI Export Format
VR 1.0
PT Journal
AU Fedosov, AI
Fedosov, SA
TI Software for computing the parameters of the thermal cycle in
pulse surface heating of a solid body
SO METAL SCIENCE AND HEAT TREATMENT
LA English
DT Article
SN 0026-0673
TC 0
BP 501
EP 503
PG 3
JI Met. Sci. Heat Treat.
PY 2001
PD NOV-DEC
VL 43
IS 11-12
GA 561EL
J9 METAL SCI HEAT TREAT-ENGL TR
UT ISI:000176127200041
ER
PT Journal
AU Fedosov, S
TI Laser spot welding of bearing protective washers
SO SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
LA English
DT Article
SN 1362-1718
AB Laser spot welding has been applied for the fastening of
protective bearing washers. The technology and laser welding
plants employed are described. A correlation between the
appearance of the spot welds and their quality has been
discovered The mechanism of welding deformation has been
revealed and ways of reducing this are discussed. (C) 2001 1oM
Communications Ltd.
TC 0
BP 194
EP 196
PG 3
JI Sci. Technol. Weld. Join.
PY 2001
VL 6
IS 3
GA 462KC
J9 SCI TECHNOL WELD JOIN
UT ISI:000170418400011
ER
PT Journal
AU Fedosov, SA
TI Laser beam hardening of carbon and low alloyed steels:
discussion of increased quantity of retained austenite
SO JOURNAL OF MATERIALS SCIENCE
LA English
DT Article
SN 0022-2461
AB It was shown that mainly three effects are responsible for the
increased quantity of retained austenite in carbon and low
alloyed steels after laser transformation hardening. At low
peak temperatures a high dislocation density appears in the
initial austenite phase during the reversed polymorphic
transformation which is preserved till the martensite
transformation begins and retards this reaction. At high peak
temperatures this is more complete carbides dissolution than
after standard furnace hardening. Both effects are overlapped
by a third one. This is the carbon up-hill diffusion resulting
in surface enrichment of carbon and a decrease of the
martensite start temperature. (C) 1999 Kluwer Academic
Publishers.
TC 0
BP 4259
EP 4264
PG 6
JI J. Mater. Sci.
PY 1999
VL 34
IS 17
GA 223DY
J9 J MATER SCI
UT ISI:000081826200022
ER
Home page | Остаточный аустенит | Шероховатость | Точечная лазернаясварка | "Thermo" | Дамасская сталь | Кинетическое индентирование
Home page | Retained austenite | Roughness | Laser spot welding | "Thermo" | Damascus steel | DSI testing